The editor attaches to a running Football Manager 27 read-only. Writing only starts when you turn on Edit mode, and changes become permanent when you save the career in the game. This section collects everything you need for a safe start.
Help: a step-by-step guide built into the app.Real app screen, captured in demo mode with fictional data. Turkish interface shown; the app also has an English interface.
Dashboard: your career at a glance.Real app screen, captured in demo mode with fictional data. Turkish interface shown; the app also has an English interface.
Features in this module
Requirements
Free
The editor attaches to a running Football Manager 27; the game must be open with a career loaded.
TACTRIX Editor 27 is not a save-file editor: it reads and writes the memory of the running game. You therefore need to be inside a loaded career, not on the game's main menu.
It is meant for offline, single-player careers only. Backing up your career save before you start editing is recommended.
How to use it
1Start Football Manager 27 and load a career (be inside the game, not on the main menu).
2If the game runs as administrator, start the editor as administrator too. If access is denied, use the "Restart as administrator" button shown at the top.
3Use it only in offline, single-player careers and back up your save before editing.
Limitations and notes
Starting as administrator is only needed when the game itself runs as administrator.
The editor is not affiliated with Sports Interactive or SEGA; the risk of writing to a wrong field is yours.
Connecting
Free
The editor attaches to the running game; the header shows a status dot, the manager, the club and the game date.
The connection always opens read-only: nothing in the game changes until you turn on Edit mode. The data loads by itself; the Refresh button (F5) reloads it when needed.
How to use it
1Start the game and load your career first, then start the editor.
2The status dot at the top left shows the connection; the manager, club and game date appear next to it.
3If the data does not load, press the Refresh button at the top right (or F5).
4If you close the game and open another career, use Refresh to reload the data.
Limitations and notes
The connection opens read-only; start the game and load the career first.
Edit mode
License required
The switch at the top right enables writing; until then the editor only reads.
While Edit mode is off, every page is read-only. Turning the switch on enables the Edit / Save buttons on the pages and Quick Actions. A warning appears the first time; you read it and confirm.
Changed fields are outlined first and turn green once saved. If you leave a page with unsaved changes, you are asked to Save / Discard / Cancel. The first time Edit mode is turned on in a session, your most recently changed career save is backed up automatically.
How to use it
1Turn on the "Edit mode" switch at the top right. Read and confirm the warning shown the first time.
2The Edit / Save buttons on the pages and Quick Actions now work.
3Turn the switch off when you are done. Use "Turn on Edit mode automatically when connected" in Settings to automate it.
Limitations and notes
Off by default; it can optionally turn on automatically when connected.
Changes live only in the game's memory until you save the career in the game.
Without a license the app runs read-only; edit attempts are refused with a license prompt.
A 4-step welcome window on first start that shows the connection status live.
The guide takes you from opening the game and loading a career to connecting, Edit mode, Help and Ctrl+K. A green tick appears on the matching step once you are connected and when you turn on Edit mode.
How to use it
1The welcome window opens by itself on first start.
2Use Next / Back to move, Skip to close, Finish to complete. If "Don't show again" is ticked, the window no longer opens by itself.
3To open it again, use "Open the getting-started guide" on the Help page, or press Ctrl+K and type "getting-started guide".
Limitations and notes
The guide lists no separate limitation for this feature.
Saving the game
Free
Changes live in the game's memory; save the career in the game to make them permanent.
The editor changes the game's memory and does not touch the save file. When you save the career from the game's own menu the changes become permanent; if you close without saving, they are lost.
Many changes show in the game after a day advances or when you reopen the screen. Some, such as appearance and the squad limit, only show after you save and reload the career.
How to use it
1To make the changes permanent, save the career from the game's own menu (File / Save).
2If you close the game without saving, the changes are lost.
3To see changes such as appearance and the squad limit, save and reload the career.
Limitations and notes
Appearance and the squad limit only show after saving and reloading.
Advanced: enable experimental edits
Free
One switch that unlocks fields not yet fully verified in the game.
This switch turns on "Allow unverified fields" and "Experimental features" together. Unverified fields are locked by default. If an action is refused, the "Enable in Settings" button in the notification takes you straight to this setting.
Features marked "Advanced switch required" or "May require the advanced switch" on this site depend, or may depend, on this switch.
How to use it
1Open the Settings page.
2On the "Editing" card turn on "Advanced: enable experimental edits".
3If an action is refused, use the "Enable in Settings" button in the notification.
Limitations and notes
Once you turn it on, the risk of writing to a wrong field is yours; back up your save first.
The setting is open to everyone; it only matters for edits made with a license.
After game updates
Free
The editor recognises a new game build and tries to adapt; if validation fails, writing stays off.
When the game is updated, the editor recognises the new version and tries to adapt; usually there is nothing for you to do. You see the state in Settings → About under "Game version" and "Profile status".
If the profile is not supported, writing stays disabled for safety. The evidenced builds are FM27 27.0 and 27.0.1; day-one support for a new game patch is not guaranteed.
How to use it
1Restart the editor after the game was updated.
2Check "Profile status" in Settings → About.
3If the profile is not supported, wait for an up-to-date editor version.
Limitations and notes
If the profile is not supported, writing stays off.
Adapting can take a few seconds on the first start after an update.
Using Help
Free
A searchable in-app guide that covers every module.
The Help page has a section list on the left and step-by-step topics on the right. The search box at the top searches all sections; "Open the getting-started guide" shows the welcome steps again. The feature descriptions on this site are based on the same guide.
How to use it
1Choose a section from the list on the left; the topics and steps appear on the right.
2Type in the search box at the top to search all sections.
3Press Ctrl+K and type "Help" to reach the page from anywhere.
Limitations and notes
The guide lists no separate limitation for this feature.
Free edition
Free
Without a license every page can be viewed read-only; edits are refused with a license prompt.
In the free edition the app attaches to the game read-only and every page can be viewed, including lists, filters, Scout search and exports. Every action that writes to the game is refused with a license prompt; action entries in the command palette are marked "License required".
The free/licensed edition ships with the next app release; the built 1.1.0 packages predate licensing.
How to use it
1Install and start the app; it runs without a license too.
2Load your career and browse the pages read-only.
3When you want to edit, enter your license key in the license window.
Limitations and notes
The guide lists no separate limitation for this feature.
License activation
Free
Enter your key in the license window to unlock editing.
The license key has the format FM27-XXXXX-XXXXX-XXXXX-XXXXX. Activation needs internet once; status, expiry and e-mail show in Settings → License.
The license allows short offline use: a refresh is due after about 3 days, after which you can work offline for up to 7 more days.
How to use it
1Open the license window.
2Enter your key and activate it (an internet connection is needed).
3Check the status in Settings → License.
Limitations and notes
Activation needs internet once.
When the offline period runs out, editing is locked until an online refresh.
Remove this device
Free
A license works on 2 devices at a time; free a slot from inside the app.
Activation on a third device is refused until a slot is freed. When moving to a new computer, free the slot on the old one with "Remove this device".
How to use it
1Open the Settings → License card.
2Press "Remove this device".
Limitations and notes
At most 2 devices at a time.
Free and licensed
What can you do without a license?
Without a license every page opens read-only. Every action that writes to the game needs a license and Edit mode.